|
Detailed parameter description of diesel generator set |
| Diesel generator sets |
diesel engine |
alternator |
| Unit model: |
|
Diesel engine model: (quotation diesel engine model) |
|
Generator model: (quotation generator model) |
|
| Factory: |
Jiangsu Panda Power Technology Co., Ltd |
Factory: |
|
Factory: |
|
| Unit Origin:: |
Yangzhou, China |
Diesel engine origin: |
|
Origin: |
|
| Main power (kW/KVA): |
|
Main power (kW/KVA): |
|
Main power (kW/KVA): |
|
| Standby Power (kW/KVA): |
|
Standby Power (kW/KVA): |
|
Standby Power (kW/KVA): |
|
| Unit Size (mm): |
*
*
|
Rated fuel consumption (g/kW.h): |
|
Efficiency: |
97.00 |
| Unit weight (kg): |
|
Rated engine fuel consumption (g/kW.h) |
0.30 |
Rated Voltage (V): |
|
| Rated Current (A): |
|
Bore (mm) × stroke (mm): |
* |
Rated Power Factor: |
0.8 |
| Rated Voltage (V): |
|
Rotation speed (r/min): |
|
AVR Voltage Regulation: |
110V-690V factory fixed adjustment |
| Rated Frequency (HZ): |
50 |
Number of cylinders: |
|
Excitation mode: |
Brushless self-excitation |
| Steady-state voltage regulation: |
≤0.5% |
Cylinder arrangement: |
|
Exciter: |
Permanent magnet exciter |
| Steady-state frequency regulation: |
≤0.5% |
Displacement (L): |
|
Phases: |
3 |
| Transient Voltage Regulation: |
≤15% |
Exhaust Temperature (°C): |
485 |
Wiring method: |
Y-shaped |
| Transient Frequency Regulation: |
≤5% |
Coolant Capacity (L): |
|
Protection Level: |
IP23 |
| Voltage Volatility: |
≤0.5% |
Coolant Medium: |
Soft water, antifreeze |
Insulation Grade: |
H |
| Frequency Volatility: |
≤0.5% |
Maximum Operating Temperature (°C): |
103 |
Winding Material: |
All copper |
| Voltage Stabilization Time : |
≤1.5 |
Oil Capacity (L): |
|
Stator winding pitch: |
All copper |
| Frequency Stabilization Time : |
≤3 |
Oil grade: |
|
Number of stator winding turns: |
All copper |
| Wiring method: |
3 phases and 4 wires |
Speed regulation method: |
|
Winding temperature detection: |
RTD (optional) |
| Startup method: |
Electric start |
Inhalation method: |
|
Winding temperature protection: |
Thermistor and Relay (Optional) |
| Altitude: |
≤1000M |
Rotation direction: |
Counterclockwise |
Insulation protection: |
Winding integral epoxy casting (optional) |
| Relative humidity: |
≤90% |
Idle Speed (rpm): |
600±50 |
Stator and Rotor Material: |
Baosteel silicon steel sheet copper insulated wire winding |
| Ambient Temperature: |
≤40°C |
Cylinder Ignition Sequence: |
|
Bearings: |
0.1 mm high-precision fully sealed maintenance-free bearing |
| Noise: |
|
Cooling method: |
Fully enclosed water circulation forced air cooling |
Connection method: |
Flexible platter connection |