Apply the vellum paper cover to the side of drawer wall as shown below. 如下图所示,将绒纸封面应用于抽屉侧壁。
1.1.2.2. Insert Paper Tray and Tray Supports 1.1.2.2. 插入纸盘和纸盘支架
Glue the supports on the paper tray as shown below. Place the glue on the paper tray and glue the paper tray supports on it. Glue the flap of the paper tray to the support as well. Put glue on the outside of the support (250-00163). 按照下图所示在纸盘上粘贴支架。在纸盘上涂胶,并将纸盘支架粘贴在上面。同时将纸盘的翻折部分也粘贴到支架上。在支架的外侧涂胶(250-00163)。
Womanizer, Next Duo, Packaging Guide Womanizer Next Duo,包装指南
WOW WOW TECH ^("TM ") Document Number WI-00353 REV A
Release Date (dd//mm//yy) 02//04//25
Womanizer, Next Duo, Packaging Guide | WOW WOW TECH ${ }^{\text {TM }}$ | Document Number | WI-00353 | REV | A |
| :--- | ---: | :--- | :--- | :--- |
| | Release Date $(\mathrm{dd} / \mathrm{mm} / \mathrm{yy})$ | | | $02 / 04 / 25$ |
| Womanizer, Next Duo, Packaging Guide | | | | |
Roll up the cable 840-00019 to a circle with an inner diameter of approx. 40 mm and place the cable on top of the paper wrap (225-00685). 将线缆 840-00019 卷成内径约 40 毫米的圆圈,并将线缆放在纸质包装袋(225-00685)上方。
Fold the long sides of the paper wrap over the cable and into the middle of it. 将纸质包装袋的长边折叠到线缆上方,并折入中间部分。
Fold the hooks over the folded ends of the paper wrap and close it by interlocking the hooks. 将挂钩折叠在纸质包装袋的折叠端上,并通过挂钩相互扣锁来关闭包装。
Womanizer, Next Duo, Packaging Guide Womanizer, Next Duo, 包装指南
WOW WOW TECH ^("TM ") Document Number WI-00353 REV A
Release Date (dd//mm//yy) 02//04//25
Womanizer, Next Duo, Packaging Guide | WOW WOW TECH ${ }^{\text {TM }}$ | Document Number | WI-00353 | REV | A |
| :--- | ---: | :--- | :--- | :--- |
| | Release Date $(\mathrm{dd} / \mathrm{mm} / \mathrm{yy})$ | | | $02 / 04 / 25$ |
| Womanizer, Next Duo, Packaging Guide | | | | |
Place the inlay (225-00732/225-00736/225-00740) in the accessory box drawer (225-00731/ 225-00735/225-00739). Place the magnetic charger cable (840-00019 + 225-00685) in the smaller pocket of the inlay and put the bagged Stimulation Head (465-00109/465-00110/46500111) on top. Place the cotton pouch (465-00030) on the other side and the Manual Sleeve (225-00733/225-00737/225-00741) on top of it. 将嵌件(225-00732/225-00736/225-00740)放入配件盒抽屉(225-00731/225-00735/225-00739)中。将磁性充电线缆(840-00019 + 225-00685)放入嵌件的较小口袋,并将装袋的刺激头(465-00109/465-00110/465-00111)放在其上方。将棉布袋(465-00030)放在另一侧,并将手册套(225-00733/225-00737/225-00741)放在其上。
Insert the equipped accessory box drawer in the accessory box sleeve 225-00730/225-00734/225-00738). 将装好的配件盒抽屉插入配件盒套筒(225-00730/225-00734/225-00738)中。
Rotate the accessory box by 90_\underline{\mathbf{9 0}} clockwise and insert it next to the paper tray. 将配件盒顺时针旋转 90_\underline{\mathbf{9 0}} ,并将其插入纸盘旁边。
Womanizer, Next Duo, Packaging Guide 女性按摩器、Next Duo 系列、包装指南
WOW WOW TECH ^("TM ") Document Number WI-00353 REV A
Release Date (dd//mm//yy) 02//04//25
Womanizer, Next Duo, Packaging Guide | WOW WOW TECH ${ }^{\text {TM }}$ | Document Number | WI-00353 | REV | A |
| :--- | ---: | :--- | :--- | :--- |
| | Release Date $(\mathrm{dd} / \mathrm{mm} / \mathrm{yy})$ | | | $02 / 04 / 25$ |
| Womanizer, Next Duo, Packaging Guide | | | | |
1.1.3.3. Serial Number and Legal Labels 1.1.3.3. 序列号和法律标签
Apply Serial Number Sticker (240-00292) and other legal labels onto the packaging in the positions as indicated in the artwork. 将序列号贴纸(240-00292)和其他法律标签贴在 artwork 中指示的位置上的包装上。
1.1.3.4. Bag the Boxed Assembly 1.1.3.4. 将装箱组件装入袋中
Bag the product Boxed Assembly with the Poly Bag (210-00010). 使用塑料袋(210-00010)打包装配好的产品箱。
Tape the bottom of the Printed Outer Carton (225-00746) using Wow Tech BOPP Tape (44500057) a seen below. Tape should overlap the sides of the box by a minimum of 50 mm where indicated. 使用 Wow Tech BOPP 胶带(44500057)按下图所示在印刷外箱(225-00746)底部进行胶带封装。胶带在指定位置应至少覆盖箱子侧面 50 毫米。
1.2.2. Insert into Printed Outer Carton 1.2.2. 插入印刷外箱
Place 8(L2xx W2xx H3)8(\mathrm{~L} 2 \times W 2 \times H 3) product boxes as specified in the product BOM into the Outer Carton (22500746). 按照产品物料清单(BOM)将 8(L2xx W2xx H3)8(\mathrm{~L} 2 \times W 2 \times H 3) 产品盒放入外箱(22500746)。
Womanizer, Next Duo, Packaging Guide 女性按摩器、Next Duo 系列、包装指南
WOW WOW TECH ^("TM ") Document Number WI-00353 REV A
Release Date (dd//mm//yy) 02//04//25
Womanizer, Next Duo, Packaging Guide | WOW WOW TECH ${ }^{\text {TM }}$ | Document Number | WI-00353 | REV | A |
| :--- | ---: | :--- | :--- | :--- |
| | Release Date $(\mathrm{dd} / \mathrm{mm} / \mathrm{yy})$ | | | $02 / 04 / 25$ |
| Womanizer, Next Duo, Packaging Guide | | | | |
1.2.3. Tape, Top, Outer Carton 1.2.3. 外箱顶部粘带
Tape the top of the Outer Carton (225-00746) using Wow Tech BOPP Tape (445-00057) as seen below. Tape should overlap the sides of the box by a minimum of 50 mm where indicated. 使用 Wow Tech BOPP 胶带(445-00057)按照下方所示粘贴外箱(225-00746)的顶部。胶带应在指定位置至少覆盖盒子侧面 50 毫米。
1.2.4. Product Box Carton Labels 1.2.4. 产品箱外标签
Place 2 Carton Labels (240-01107/240-01105/240-01106), One QR-Code Label (240-00143) and 2 Battery Caution Labels (240-00038) onto the Outer Carton. 将 2 张外箱标签(240-01107/240-01105/240-01106)、1 张二维码标签(240-00143)和 2 张电池警示标签(240-00038)贴在外箱上。
Tape the bottom of the Outer Carton (225-00470) using WOW Tech Group Packing Tape (44500057) a seen below. Tape should overlap the sides of the box by a minimum of 50 mm where indicated. 使用 WOW 科技集团包装胶带(44500057)对外箱(225-00470)底部进行胶带封装,如下所示。胶带在指定位置应至少在箱子侧面重叠 50 毫米。
2.2.2. Insert into Printed Tester Kit Outer Carton 2.2.2. 插入印刷测试器套件外箱
Place 8 boxed Tester Kits as specified in the product BOM into the Printed Outer Carton (22500470). 按照产品物料清单(BOM)指定,将 8 个装箱测试套件放入印刷外箱(22500470)中。
Womanizer, Next Duo, Packaging Guide 女性按摩器、Next Duo 系列、包装指南
WOW WOW TECH ^("TM ") Document Number WI-00353 REV A
Release Date (dd//mm//yy) 02//04//25
Womanizer, Next Duo, Packaging Guide | WOW WOW TECH ${ }^{\text {TM }}$ | Document Number | WI-00353 | REV | A |
| :--- | ---: | :--- | :--- | :--- |
| | Release Date $(\mathrm{dd} / \mathrm{mm} / \mathrm{yy})$ | | | $02 / 04 / 25$ |
| Womanizer, Next Duo, Packaging Guide | | | | |
2.2.1. Tape, Top, Outer Carton 2.2.1. 外箱顶部胶带
Tape the top of the Outer Carton (225-00470) using Wow Tech BOPP Tape (445-00057) as seen below. Tape should overlap the sides of the box by a minimum of 50 mm where indicated. 使用 Wow Tech BOPP 胶带(445-00057)在外箱(225-00470)顶部粘贴胶带,如下所示。胶带应在指示处至少重叠盒子侧面 50 毫米。
2.2.2. Product Box Carton Labels 2.2.2. 产品包装箱标签
Place 2 Carton Labels (240-01178), One QR-Code Label (240-00143) and 2 Battery Caution Labels (240-00038) onto the Outer Carton. 在外箱上贴 2 张纸箱标签(240-01178)、1 张二维码标签(240-00143)和 2 张电池警示标签(240-00038)。